General corporate brochure detailing standard products and ISO containers
A series of open dewars for liquid nitrogen, including the DF Series, MSD-25, ES Series & IC Series dewars
The CH Series of liquid helium dewars have been designed to meet the exacting requirements of ultra-low temperature applications in research and industry.
The GT Series of self pressurising cryogenic cylinders has been designed to efficiently store product in its liquid state and provide a regulated stream of gas. Each vessel automatically maintains pressure at a pre-set level using the integral pressure building circuit. Suitable for a host of applications within the industrial, medical & cryo-biological fields.
The larger capacity liquid helium dewars are commonly used in conjunction with liquefiers, or where the bulk storage of product is required. Vessels up to 15,000 litres available - intermediate or larger sizes on special request
The LT Series of vessels are suitable for use in both laboratory and industrial applications. A wide range of vessel sizes and configurations (including bottom outlet, internal pressure building facility and multiple neck configurations) give maximum choice and versatility. Road transportable versions of the 300 - 2000 litre vessels are also available.
The PHV Series of industrial tanks are suitable for the bulk storage or transportation of both liquid nitrogen and argon. The range has been designed to give years of trouble free operation for applications requiring a high duty cycle.
The PVT Series of low pressure industrial tanks are suitable for the bulk storage of liquid nitrogen. The range has been designed with a small footprint to give maximum storage capacity for the minimum ground area. The PVT offers years of trouble free operation.
The TPV Series of self pressurising cryogenic vessels for liquid nitrogen and argon (liquid oxygen on request) are suitable for a host of applications within the industrial, medical, research & cryo-biological fields. Each vessel has been designed to automatically maintain pressure at a pre-set level using the integral pressure building circuit.
General corporate product catalogue detailing standard tanks and ISO containers
Wessington's Wellmite series of tanks are classified as T75 UN Portable tanks under the rules of ADR and IMDG. Wellmites are designed, manufactured and tested for storing and transporting liquid nitrogen by road, sea and from supply vessel to offshore platform.
The World Leading ISO PACK tank is the product of choice for well service companies all around the World. Designed to be transported either individually or in pairs (coupled together) as one 20ft ISO unit, this configuration allows for the tanks to be shipped on standard container ships anywhere in the world, by the most economical method
The CRYO PACK 3000 tank has approvals for road, rail and sea transport. It also has DNV 2.7-1/EN 12079 approval and is used for nitrogen service on oil production platforms throughout the world.
The ISO PACK 4000 tank offers the cryogenics industry a robust, fully framed, portable, 20ft ISO container designed for transporting product by road, rail or sea.
The ISO VAC 20 tank has been designed as a standard 20ft ISO container for the safe storage and transport of refrigerated liquefied air gases. A new frame arrangement with Blair corner castings, & lockable valve protection cabinet, containing the valves, gauges, vacuum check gauge connection and a separate document holder.
The ISO VAC 20-CO2 tank has been designed as a standard 20ft ISO container for the safe storage and transport of CO2. A new frame arrangement with Blair corner castings, & lockable valve protection cabinet, containing the valves, gauges, vacuum check gauge connection and a separate document holder.
The ISO VAC 20-LNG has been designed as a standard 20ft ISO Container for the safe storage and transport of Liquefied Natural Gas (LNG)
The ISO VAC 40-LNG has been designed as a standard 40ft ISO Container for the safe storage and transport of Liquefied Natural Gas (LNG)
This new addition to our range is built around a standard 40ft ISO frame with Blair corner castings, & lockable valve protection cabinet, containing the valves, gauges, vacuum check gauge connection and a separate document holder
Custom built cryogenic road tankers both rigid and semi trailers with multiple options for capacity, running gears, working pressures. Other options can include multi compartment tanks particularly suited to rural remote locations where small volumes are required of differing products.
Wessington can repair your ISO containers to an as new condition, considerably extending the life expectancy of your original purchase. We can also carry out on site full servicing to help keep your tankl operating in a safe & efficient manner.
Repair, recertify & revalidate your vessel to an as new condition, considerably extending the life expectancy of your original purchase. We can also carry out on site full servicing to help keep your vessel operating in a safe & efficient manner.
EU CERTIFICATE OF CONFORMITY
CERTIFICATE 0343/PED/COV0712913/1 SCHEDULE
DESIGN AND MANUFACTURE OF LIQUID GAS CRYOGENIC STORAGE VESSELS AND ASSOCIATED EQUIPMENT.
EU CERTIFICATE OF CONFORMITY
CERTIFICATE 0343/PED/COV0912121/1 SCHEDULE
DESIGN AND MANUFACTURE OF VESSELS,PIPING AND ASSEMBLIES FOR THE STORAGE AND CARRIAGE OF GROUP 1 AND GROUP 2 FLUIDS AND GASES.
CERTIFICATE NO. COV1626027/37/1 SCHEDULE
EC CERTIFICATE OF AUTHORISATION TRANSPORTABLE PRESSURE EQUIPMENT DIRECTIVE.
General conditions of trading Version 5. November 2020
Wessington Cryogenics Covid-19 Containment Policy
Quality Policy. June 2021
Health and Safety Policy certificate June 2021
Environmental Policy Certificate June 2021