Slings: 4-leg wire rope to DNV 2.7-1 (45°) (optional)
2 x Forklift pockets (300 x 150mm ext). 1300mm between centres.
Inspection Agency: 3rd party inspection - Lloyds Register.
Permitted Cargo: IMDG T14 & lining-compatible. (Operator of vessel must ensure commodity carried is listed under applicable UN Portable Tank instruction and is in no way corrosive to the lining) .
Stacking: 9 High
Fittings & Accessories
Manlid: 1 x 488mm ID Bolted design, fitted to upper side of tank.
Level Gauge: Halar coated
Safety-Relief Valve: 1 x 80mm MK3 Flanged 3" ASA 150 Maxi pressure vacuum relief valve c/w bursting disc and Manometer Fortvale or equal. Set pressure 4.4 bar.
Airline Provision: 2" BSP with cap.
Top Inlet: 1-off 4" Top inlet connection consisting of a top-mounted 4" PTFE-lined butterfly valve, piped to the side of the tank and termanating in a 4" Fig 207 Hammer lug fitting & cap with chain
Top Outlet: 1-off 4" Top outlet connection consisting of a top-mounted 4" PTFE-lined butterfly valve, piped to the side of the tank and terminating in a 4" Fig 207 Hammer lug fitting & cap on chain. Internal removable flanged polypropylene syphon pipe fitted.
Dipstick Access: 1 x Dip Connection consisiting of a male 3" BSP nipple mounted in Manlid cover c/w cap and chain (other optiions available)
Dipstick: Polypropylene type, marked in inch increments, housed externally in a stainless steel pipe.
Walkway: GRP walkway covering all fittings to prevent slings snagging (acid resistant) with anti slip surface. Complete with centre hatch and provision for fall arrest connection.
Ladder: Incorporated into frame at centre of tank with anti slip tape.
Internal finish: Material as mill. All sharp edges removed, all edges radiused suitably for lining. Shotblasted to SA 2.5 and lined using Chemoline 4B Butyl Rubber (optional linings on request)
External finish: NORSOK M501 System 1. Blast clean to SA 2.5. InterZinc 52 to 60 mic. Interguard 475HS to 160 mic. Interthane 990 to 60 mic.